The SBC220 2-Bay Networked Charging Station enables docked charging and storage for any combination of two SB900A batteries or ULXD1, QLXD1, AD1 (bodypack) or ULXD2, QLXD2 or AD2 (handheld) wireless transmitters. When the connected to a network, the charging status of each transmitter can be viewed remotely while the transmitters are in the charger, using Shure Wireless Workbench® Management software.Up to four SBC220 units can be linked together to share power and network connectivity.
- Charging for any combination of up to 2 supported batteries, or transmitters using Shure rechargeable batteries
- Connect up to 4 of any combination of SBC220 and SBC240 units with shared power and network connectivity
- LEDs indicate charge status and battery errors
- Storage mode to prepare batteries for long-term storage
- Network-enabled for remote monitoring with Shure Wireless Workbench
- Supplies full charges in three hours, 50% charge in one hour
- Charge status bi-color LEDs for each battery / transmitter
|Shure Update Utility 2.4.4 (64-bit Windows 7, 8, 10)||ZIP||21.9 mb|
|Shure Update Utility 2.4.4 (32-bit Windows 7, 8, 10)||ZIP||20.7 mb|
|Shure Update Utility 2.4.4 (64-bit macOS 10.12 - 10.14)||ZIP||19.5 mb|
To install firmware for this product, Shure Update Utility is required. For more information, reference the Quick Start Guide for Shure Update Utility.
|SBC220/240 - 2-Bay Chargers See release notes||Posted January 18, 2019||Download PACK (497 kb)|
|SBC220/240 - 2-Bay Chargers See release notes||Posted September 05, 2018||Download PACK (497 kb)|
What is the difference between UHF and VHF frequencies?
Frequency Bands for Wireless Microphone Systems Every wireless microphone system transmits...
Troubleshoot wireless mic dropouts
Dropouts in wireless mics can be caused by many things, including antenna placement, bad anten...
Five Mistakes to Avoid When Using Wireless
While wireless systems have freed performers from the bonds of cords and cables, they've u...
What is "Squelch" on a wireless receiver?
Blog Posting about Squelch An circuit that is important to proper receiver behavior is ca...
Locking and Unlocking transmitters and receivers
BLX SERIES Transmitter (Power & Frequency) Lock or Unlock: With transmitter ON, hold do...
Can I use two (or more) wireless microphones with one receiver?
No, this will not work. A wireless receiver can only demodulate the signal from one active mi...
Instructional articles, guides, demos and more! Our experts offer industry-proven tips and tricks to help you get the most from your gear.
Service & Repair
Detailed policy information regarding customer service numbers, service modifications, and replacement parts.