• Page 5 of 47
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 47
Filter by: Date Posted Filter by: Title Filter by: Version Associated Products Filter by: File Size
November 15, 2018 GLXD1 - Bodypack Transmitter 2.2.6 See release notes GLXD1
Download PACK (593 kb)

Improvement

  • Bug fix

Known Issue

  • After attempting to downgrade GLX-D devices from version 2.2.5 and higher to version 2.0.0.1, Shure Update Utility will maintain the same version number followed by an asterisk (*), and incorrectly state in the Event Log that the firmware failed to install. The firmware downgrade will actually be successful.

Notes

  • GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions. Ensure all GLX-D devices in a configuration have the same firmware version.
  • For operation of GLX-D 2.2.6 devices with other Shure networked systems, see the following list of minimum software versions:
    • Shure Update Utility 2.4.3
November 15, 2018 GLXD2 - Handheld Transmitter 2.2.6 See release notes GLXD2
GLXD2/BETA58
GLXD2/BETA87A
GLXD2/SM58
GLXD2/SM86
Download PACK (593 kb)

Improvement

  • Bug fix

Known Issue

  • After attempting to downgrade GLX-D devices from version 2.2.5 and higher to version 2.0.0.1, Shure Update Utility will maintain the same version number followed by an asterisk (*), and incorrectly state in the Event Log that the firmware failed to install. The firmware downgrade will actually be successful.

Notes

  • GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions. Ensure all GLX-D devices in a configuration have the same firmware version.
  • For operation of GLX-D 2.2.6 devices with other Shure networked systems, see the following list of minimum software versions:
    • Shure Update Utility 2.4.3
November 15, 2018 GLXD4 - Wireless Receiver 2.2.6 See release notes GLXD4
Download PACK (1.13 mb)

Important

  • Update all GLX-D devices in a configuration to the same firmware version.
  • To update or downgrade GLXD4 receivers, use Shure Update Utility version 2.4.3 and download the appropriate firmware.

Improvement

  • Bug fix

Known Issue

  • After attempting to downgrade GLX-D devices from version 2.2.6 to version 2.0.0.1, Shure Update Utility will maintain the same version number followed by an asterisk (*) and incorrectly state in the Event Log that the firmware failed to install. The firmware downgrade will actually be successful.

Notes

  • To operate GLXD4 version 2.2.6 devices with other Shure software, see the following list of minimum versions:
    • GLXD1/2 Transmitters 2.2.6
    • GLX-D GLXD4/4R/6 Receivers 2.2.6
    • UA846Z2 Frequency Manager 2.2.6
    • Shure Update Utility 2.4.3
November 15, 2018 GLXD6 - Guitar Pedal Receiver 2.2.6 See release notes GLXD6
Download PACK (850 kb)

Important

Update all GLX-D devices in a configuration to the same firmware version

Improvement

  • Bug fix

Known Issue

  • After attempting to downgrade GLX-D devices from version 2.2.5 and higher to version 2.0.0.1, Shure Update Utility will maintain the same version number followed by an asterisk (*), and incorrectly state in the Event Log that the firmware failed to install. The firmware downgrade will actually be successful.

Notes

  • GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions. Ensure all GLX-D devices in a configuration have the same firmware version.
  • To operate GLXD6 version 2.2.6 devices with other Shure software, see the following list of minimum versions:
    • GLXD1/2 Transmitters 2.2.6
    • GLXD4/4R/6 Receivers 2.2.6
    • UA846Z2 Frequency Manager 2.2.6
    • Shure Update Utility 2.4.3
November 15, 2018 GLXD4R - GLX-D Advanced Rackmount Receiver 2.2.6 See release notes GLXD4R
Download PACK (652 kb)

Important

  • Update all GLX-D devices in a configuration to the same firmware version.
  • To update or downgrade GLXD4 receivers, use Shure Update Utility version 2.4.3 and download the appropriate firmware.

Improvement

  • Resolved a rare transmitter re-linking issue that occurs after going out of range

Notes

  • To operate GLXD4R version 2.2.6 devices with other Shure software, see the following list of minimum versions:
    • GLXD1/2 Transmitters 2.2.6
    • UA846Z2 Frequency Manager 2.2.6
    • Shure Update Utility 2.4.3
November 15, 2018 UA846Z2 - GLX-D Advanced Frequency Manager 2.2.6 See release notes UA846Z2
Download PACK (38.6 kb)

Improvement

  • Bug fix

Notes

  • GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions. Ensure all GLX-D devices in a configuration have the same firmware version.
  • To operate GLXD6 version 2.2.6 devices with other Shure software, see the following list of minimum versions:
    • GLXD1/2 Transmitters 2.2.6
    • GLXD4/4R/6 Receivers 2.2.6
    • Shure Update Utility 2.4.3
November 15, 2018 SBRC - Shure Battery Rack Charger 1.1.2 See release notes SBRC
Download PACK (531 kb)

Recommendation

SBRC devices updated to version 1.1.2 should not be downgraded to version 1.0.1

Improvement

  • Support for SBM910, SBM920, and SBM910M charging modules.
  • Command string support for Flash/Identify.

Notes

  • Command Strings
  • To operate SBRC version 1.1.2 devices with other Shure software, see the following list of minimum versions:
    • Shure Update Utility 2.4.3
    • Wireless Workbench 6.12.5
November 07, 2018 ULXD4D - Extended Bands Dual Channel Digital Wireless Receiver 2.3.4 See release notes ULXD4D
Download PACK (5.22 mb)

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Support new hardware revisions of ULX-D. New revisions can't be downgraded below version 2.3.4.

Known Issues

  • New hardware revisions of ULX-D version 2.3.4 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD4D/Q is on version 1.3.6 or older, first upgrade to version 1.4.8 before upgrading to the latest version of ULX-D. Because version 1.4.8 is no longer available on Shure Update Utility, you will need to download the firmware from Shure's Firmware Archive. Follow these steps:
    1. Download Shure Update Utility
    2. Download ULXD4D version 1.4.8 or ULXD4Q version 1.4.8 to your computer and copy the .pack file to Documents > Shure > Firmware
    3. Launch Shure Update Utility, connect your devices to your computer, and follow SUU instructions on uploading new firmware to devices.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, updates from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    1. Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    2. Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    3. Update receiver to 1.6.6 or later.
  • To operate ULX-D version 2.3.4 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • SBC250/450/850 Networked Charging Stations 2.3.4
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • PSM1000 1.6.19
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
November 07, 2018 ULXD4Q - 900 MHz ISM Quad Channel Digital Wireless Receiver 2.3.4 See release notes ULXD4Q
Download PACK (5.69 mb)

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Support new hardware revisions of ULX-D. New revisions can't be downgraded below version 2.3.4.

Known Issues

  • New hardware revisions of ULX-D version 2.3.4 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD4D/Q is on version 1.3.6 or older, first upgrade to version 1.4.8 before upgrading to the latest version of ULX-D. Because version 1.4.8 is no longer available on Shure Update Utility, you will need to download the firmware from Shure's Firmware Archive. Follow these steps:
    1. Download Shure Update Utility
    2. Download ULXD4D version 1.4.8 or ULXD4Q version 1.4.8 to your computer and copy the .pack file to Documents > Shure > Firmware
    3. Launch Shure Update Utility, connect your devices to your computer, and follow SUU instructions on uploading new firmware to devices.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, updates from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    1. Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    2. Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    3. Update receiver to 1.6.6 or later.
  • To operate ULX-D version 2.3.4 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • SBC250/450/850 Networked Charging Stations 2.3.4
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • PSM1000 1.6.19
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2
November 07, 2018 ULXD4Q - Extended Bands Quad Channel Digital Wireless Receiver 2.3.4 See release notes ULXD4Q
Download PACK (5.69 mb)

Important

  • ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvement

  • Support new hardware revisions of ULX-D. New revisions can't be downgraded below version 2.3.4.

Known Issues

  • New hardware revisions of ULX-D version 2.3.4 are not compatible with SystemOn 2.0-3.0.1.
  • ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

Notes

  • User Guide
  • If your ULXD4D/Q is on version 1.3.6 or older, first upgrade to version 1.4.8 before upgrading to the latest version of ULX-D. Because version 1.4.8 is no longer available on Shure Update Utility, you will need to download the firmware from Shure's Firmware Archive. Follow these steps:
    1. Download Shure Update Utility
    2. Download ULXD4D version 1.4.8 or ULXD4Q version 1.4.8 to your computer and copy the .pack file to Documents > Shure > Firmware
    3. Launch Shure Update Utility, connect your devices to your computer, and follow SUU instructions on uploading new firmware to devices.
  • ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
    1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
    2. Align the infrared ports with the transmitter
    3. Press ENTER
  • Maintain an IR connection when updating transmitter firmware via IR sync. In rare occasions, updates from 1.5.6 or earlier to 1.6.6 or later can cause transmitters to become non-responsive temporarily. If the update fails and the unit is non-responsive, resolve the issue by following these steps:
    1. Using the Shure Update Utility, downgrade the firmware for the ULXD4/ULXD4D/ULXD4Q Receiver to 1.5.6 AND keep the desired transmitter firmware (1.6.6 or later).
    2. Update the transmitter firmware to 1.6.6 or later via IR menu. From the receiver menu: DEVICE UTILITIES > TX FW UPDATE. Align the infrared ports with the transmitter and then press ENTER.
    3. Update receiver to 1.6.6 or later.
  • To operate ULX-D version 2.3.4 devices with other Shure networked systems and software, see the following list of minimum versions:
    • ULX-D ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.4
    • SBC250/450/850 Networked Charging Stations 2.3.4
    • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.2.11
    • PSM1000 1.6.19
    • Axient AXT600 Spectrum Manager 2.1.22
    • Wireless Workbench 6.12.6
    • Shure Update Utility 2.4.3
    • ShurePlus Channels 1.4.2